BurstProof by Precero is an Isolation Valve System that prevents household flooding from burst flexible hoses by cutting the water at the source.
Do not be fooled by cheap imitations, only the original and best Precero BurstProof flood stop valve system works every time.
Important changes to the Queensland Development Code for Flood Stop Safety Valves
Section A5(2)(e) (iii)
Where a floor waste is installed –
flexible hose assemblies used for the connection of fixtures contained in the wet area must be fitted with flood stop safety valves approved under WMTS-479.
BurstProof is made to WMTS-479. This is an easy and very adaptable solution that will comply with this new law.
When a hose fails in the home, it’s a disaster that can cause tens of thousands of dollars in household damages.
The flexible hoses which connect appliances – like dishwashers, fridges, washing machines, toilets and taps – are all weak points in the home’s water supply.
Burst hoses can leak up to 20 litres a minute. Insured or not, the clean up, replacement and repair of water damage is stressful and costly.
BurstProof is available for Taps, Toilets, Fridges, Washing Machines and Dishwashers. This flood stop valve can be fitted on your current flexible hoses.
BurstProof comes with a 7 year replacement warranty, 12 months parts and labour warranty and 2 years on internal jumper valves.
This patented flood stop valve system cuts off the water supply when it detects an increase in water flow caused by the failure of an old or faulty hose. Water flow is cut right away, preventing damage to the home or unit.
If the system is activated, it’s simple to reset after fixing the hose. Turn the valve off till you hear the reset click, and simply turn back on slowly till the water refills the lines. It doesn’t get any easier!
Flexible hoses are used to connect the water supply to your taps and appliances. They are the weakest point in the plumbing in your house and if they fail, water will flood your home.
Flexible hoses are all subject to environmental factors with can cause failure. Even with a warranty, it is likely to be limited and not cover damage to your home caused by a failure. BurstProof is the only system guaranteed to cut the water at the source and prevent flooding if a hose should fail giving you peace of mind.
We recommend a licenced plumber installs your BurstProof valves to ensure correct installation and operation.
If the valve detects an increase in water flow, the stop valve is activated immediately, shutting off the water flow to the burst hose.
Once the hose has been repaired the valve can be reset. It’s a simple procedure of turning the valve off until you hear the reset click, then slowly turning it on to let water back into the pipe.
Yes for trade customers, we offer trade pricing and trade accounts. Please enquire with us.
All content copyright © Copper Group IP Pty Ltd 2021. The content of this document is the intellectual property of the author and cannot be reproduced without permission.